1. General Introduction
Emerson 2240S Multi-input Temperature Transmitter is approved for demanding custody transfer applications, which require very accurate level and temperature measurements for net standard volume calculations. 2240S can connect up to 16 three or four wire temperature spot elements and an integrated water level sensor. The value from each individual spot temperature element, in combination with the level value from the radar gauge is used for average liquid temperature calculation. It has an ultra high temperature conversion accuracy of ±0.05℃ (±0.09℉), supplies measured data to the Tankbus, which utilizes the FOUNDATION fieldbus communication protocol. The IP 66/67 and Nema 4X certified robust design makes it
suitable for installation in harsh environments. The water level sensor is factory calibrated. If any adjustment is necessary during installation, it can easily be done with the 2240S built-in on-line calibration feature.
2. Basic code selection of 2240S Multi-input Temperature Transmitter
2240S | Multi-input Temperature Transmitter | ||||||||||
Performance class | P | Premium: ±0.05℃ (0.09 ℉) instrument accuracy | |||||||||
Number of Temperature Sensor Inputs | 16 | Up to 16xRTD spot elements | |||||||||
08 | Up to 8xRTD spot elements | ||||||||||
04 | Up to 4xRTD spot elements | ||||||||||
00 | None | ||||||||||
Leads per Temperature Element | 4 | 4-wire or 3-wire (individual or common return) | |||||||||
3 | 3-wire (individual or common return) | ||||||||||
0 | None (for water level only, no temperature sensors) | ||||||||||
Auxiliary Inputs | A | Rosemount 765 temperature and water level sensor input | |||||||||
0 | None | ||||||||||
Tankbus: Power and Communication | F | Bus powered 2-wire FOUNDATION fieldbus (IEC 61158) | |||||||||
Hazardous Location Certification | I1 | ATEX Intrinsic Safety | |||||||||
I5 | FM-US Intrinsic Safety | ||||||||||
I6 | FM-Canada Intrinsic Safety | ||||||||||
I7 | IECEx Intrinsic Safety | ||||||||||
KA | ATEX Intrinsic Safety + FM-US Intrinsic Safety | ||||||||||
KC | ATEX Intrinsic Safety + IECEx Intrinsic Safety | ||||||||||
NA | No Hazardous Location Certification | ||||||||||
Custody transfer approval | 0 | None | |||||||||
C | PTB (German W&M approval) | ||||||||||
Housing | A | Standard enclosure, polyurethane-covered aluminum. IP 66/67 | |||||||||
Cable entry/Conduit connections | 1 | 1/2-14 NPT, female thread. (1 plug included) | |||||||||
2 | M20 x 1.5 adapters, female thread. (2 adapters and 1 plug included) | ||||||||||
G | Metal cable glands (1/2-14 NPT) | ||||||||||
E | Eurofast male connector (1 plug included) | ||||||||||
M | Minifast male connector (1 plug included) | ||||||||||
Mechanical Installation | M | Integrated installation with Rosemount 565, 566, or 765 (standard) | |||||||||
W | Mounting kit for wall installations | ||||||||||
P | Mounting kit for wall and pipes (1-2 in. vertical and horizontal pipes) | ||||||||||
0 | None | ||||||||||
Optional codes | Optional codes |
3. Typical mounting & wiring for 2240S Multi-input Temperature Transmitter
Address: P.O. Box 17033, Jebel Ali Free Zone - South 2 Dubai, United Arab Emirates
Tel: +971558915937
Fax: +971558915956
E-mail:
info@rostockgroup.com
technical@rostockgroup.com
commercial@rostockgroup.com
Get the latest special offers and discount information sent to your email address.
Copyright © Rostock Group Co.,Limited All Rights Reserved. Sitemap