1.General Introduction
Honeywell FSL100 flame detector is a small and lightweight for easy installation but it is designed to work in tough indoor/outdoor environments, as well as potentially explosive atmospheres, mainly applicable for Light Industrial/Commercial Flame detection. Installation, set-up and operation are simple. Wide solid area coverage and fast speed of response optimize safety. With inbuilt automatic test and test lamps available to cover all models, reliability is ensured., 3 versions optional to cover a wide range of flaming fires: Ultraviolet (UV), Ultraviolet/Infrared (UV/IR) and Triple Infrared (IR3).
2.General Specifications
Items | Description |
FSL100 Flame detector types | FSL100-UV, FSL100-UVIR and FSL100-IR3; Choice of red or white housings |
Range | 110 ft /35 m (IR3), 25 m/80 ft (UV, UV/IR) alarming within 10 seconds to a 1 ft2(0.1 m2) n-heptane fire |
Cone of vision | 90˚minimum horizontal and vertical |
Power | 10-28 VDC (12-24 VDC nominal) |
Local LEDs | Continuous green: normal operation Continuous yellow: fault Flashing yellow: Fault and guide to repeat self-test after a self-test failure Continuous red: alarm |
Current output | Standard available 4–20mA (stepped, sinking, non-isolated) |
Relay output | De-energized during normal operation, no alarm, SPDT, 30 VDC – 2 A, 60 W max. Energized during normal operation, no fault, SPDT, 30 VDC – 2 A, 60 W max. |
Cable gland & terminals | Cable entry M20 clearance. Supplied with gland suitable for cable diameter from 0.2” (5.5mm) to 0.5”(13mm). Terminals suitable for 0.5mm2 (20AWG) to 1.5mm2 (15AWG) wire |
Start up times | <10 sec |
Alarm response time | 8 to 30 sec |
Alarm output settings | Selectable LEDs and relays latching/non-latching; factory setting: latching |
Automatic & manual Self-Test | Automatic Sensor Test (built in Self-Test) and manual Self-Test |
Operating current normal | 25mA at 24 VDC |
Current in alarm, at 24 VDC | ±75mA at 24 VDC |
Connections to | Fire control panels using end of line (EOL) and alarm resistors (current increase), Devices that operate via relay switched outputs, PLCs with 4–20mA inputs |
End of line and alarm resistor | To be adjusted to the fire control panel; free terminals are dedicated to the resistors |
Housing | Glass Reinforced Polyester (GRP), Non-incentive. UV resistant, Self-Extinguishing V–0 (UL-94) |
Swivel mount | PA66, UV resistant; Stainless Steel fixings; 280 g (0.62 lb) |
Pressure compensating element | PCE (Pressure Compensating Element) avoids moisture build-up in the detector housing due to changes in ambient air-pressure |
Ingress protection | P65 |
Temperature, operating | –40℉ to +158℉ (–40℃ to +70℃) |
Temperature, ambient ATEX and FM class 3611 | –13℉ to +158℉ (–25℃ to +70℃) |
3.Order Code Selection
Part No. | Description |
FSL100 UV (Ultraviolet) Flame Detector | |
FSL100-UV | UV flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate. FM3260 approval. Red Housing |
FSL100-UV-W | UV flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate FM3260 approval. White Housing |
FSL100 UVIR (Ultraviolet & Infrared) Flame Detector | |
FSL100-UVIR | UV/IR flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate. FM3260 approval. Red Housing |
FSL100-UVIR-W | UV/IR flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate FM3260 approval. White Housing |
FSL100 IR3 (3 Infrared bands) Flame Detector | |
FSL100-IR3 | Triple IR flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate. FM3260 approval. Red Housing |
FSL100-IR3-W | Triple IR flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate. FM3260 approval. White Housing. |
Accessories | |
FSL100-SM21 | FSL100 Optional swivel mount |
FSL100-TL | FSL100 test lamp, incl. universal charger and carrying case; non EX |
FSL100-TLX | FSL100 test lamp, incl. carrying case; intrinsically safe |
Spare Parts | |
FSL100-TLBT | 12 VDC battery for FSL-TL test lamp |
FSL100-TLBU | H3 light bulb for FSL-TL test lamp |
FSL100-TLCH | Universal charger kit for FSL-TL test lamp |
Address: P.O. Box 17033, Jebel Ali Free Zone - South 2 Dubai, United Arab Emirates
Tel: +971558915937
Fax: +971558915956
E-mail:
info@rostockgroup.com
technical@rostockgroup.com
commercial@rostockgroup.com
Get the latest special offers and discount information sent to your email address.
Copyright © Rostock Group Co.,Limited All Rights Reserved. Sitemap