1. General Introduction
ABB TEIP11-PS is a IP converter with power stage converts a standard analog signal input to a proportional pneumatic air pressure output. There are three types available as rail & block mounting for control room and Field mount. Various ranges can be supplied on the input side and the output side for signal conversion. It only requires only compressed air 1.4 bar (20 psi) for the power supply.
2. Selection table of ABB TEIP11-PS IP converter
Main Code | Suffix Codes | Description | |||||
V18311H | TEIP11-PS I/P Converter, signal converter for standard signals, with power stage | ||||||
Explosion Protection | 1 | Standard (without explosion protection) | |||||
3 | ATEX II 2 G Ex ia IIC T6 resp. T4 Gb | ||||||
4 | ATEX II 2 G Ex d IIC T4/T5/T6 Gb | ||||||
6 | FM / CSA Intrinsically Safe | ||||||
7 | FM / CSA Intrinsically Safe and Explosion-proof | ||||||
A | GOST Russia - Ex ia | ||||||
D | GOST Russia - Ex d | ||||||
Design | 1 | Control room housing IP 20, for rail mounting | |||||
A | Control room housing IP 20, for block mounting | ||||||
6 | Field housing polyester, IP 54 | ||||||
8 | Field housing aluminium, IP 65 | ||||||
9 | Field housing stainless steel, IP 65 | ||||||
Input Signal | 1 | Input signal 0 to 20 mA | |||||
2 | Input signal 4 to 20 mA | ||||||
8 | Airtight closed function 4 to 20 mA | ||||||
0 | Other input signal | ||||||
Output Signal | 1 | Output signal 0.2 to 1 bar | |||||
2 | Output signal 3 to 15 psi | ||||||
0 | Other output signal | ||||||
Characteristic | 10 | Direct action | |||||
20 | Reverse action | ||||||
Ambient Temperature | 1 | −40 to 85 °C | |||||
2 | −55 to 85 °C | ||||||
Optional codes | Optional codes | ||||||
