1. General Introduction
ABB TEIP11 IP converter converts a standard analog signal input to a proportional pneumatic air pressure output. There are two types available as rail mounting for control room and Field mount. Various ranges can be supplied on the input side and the output side for signal conversion. It requires only compressed air 1.4 to 10 bar (20 to 145 psi) for the power supply.In order to ensure smaller dimensions and lower costs, an air power stage is not included in the pneumatic unit which reduces the air capacity.
2. Selection table of ABB TEIP11 IP converter
Main Code | Suffix Codes | Description | |||||||
V18312H | TEIP11 I/P Converter, signal converter for standard signals, without power stage | ||||||||
Explosion Protection | 1 | Standard (without explosion protection) | |||||||
2 | ATEX II 2 G Ex ia IIC T6 resp. T4 Gb | ||||||||
3 | ATEX II 2 G Ex d IIC T4/T5/T6 Gb | ||||||||
5 | FM / CSA Intrinsically Safe | ||||||||
6 | FM / CSA Intrinsically Safe and Explosion-proof | ||||||||
A | GOST Russia - Ex ia | ||||||||
D | GOST Russia - Ex d | ||||||||
Design | 1 | Control room housing IP 20, for rail mounting | |||||||
2 | Aluminum field housing, IP 65, for wall or pipe mounting | ||||||||
3 | Aluminum field housing, IP 65, add-on module for OEM applications | ||||||||
4 | Stainless steel field housing, IP 65, for wall or pipe mounting | ||||||||
5 | Stainless steel field housing, IP 65, add-on module for OEM applications | ||||||||
Input Signal | 1 | 0 to 20 mA | |||||||
2 | 4 to 20 mA | ||||||||
Output Signal | 1 | 0.2 to 1 bar | |||||||
2 | 3 to 15 psi | ||||||||
Characteristic | 1 | Direct action | |||||||
2 | Reverse action | ||||||||
Ambient Temperature | 1 | −40 to 85 °C | |||||||
2 | −55 to 85 °C | ||||||||
Air Supply (Air Pressure) | 00 | Without | |||||||
10 | Mechanical kit for digital position feedback with proximity switches | ||||||||
50 | Mechanical kit for digital position feedback with 24 V AC / DC micro switches | ||||||||
Design | 1 | Adjusted to 1.4 bar (20 PSI) | |||||||
2 | Adjusted to 3 bar (45 PSI) | ||||||||
3 | Adjusted to 4 bar (60 PSI) | ||||||||
4 | Adjusted to 5 bar (80PSI) | ||||||||
5 | Adjusted to 6 bar (87PSI) | ||||||||
7 | Adjusted to 8 bar (116PSI) | ||||||||
8 | Adjusted to 10 bar (145PSI) | ||||||||
Optional codes | Optional codes | ||||||||
