1. General Introduction
SAV144 Analog Input Modules can be installed on Field Control Unit or ESB bus node unit for 5 V/1 to 10 V voltage Input signals from field instrument such as switches and etc. Three types of connection selectable as Pressure clamp terminal, MIL connector cable or dedicated cable KS1, Dual-redundant communication is available by installing two communication modules on the same unit.
2. Standard Specification
Main Characters | Description |
Number of input channels | 16, isolated |
Rated input range | 1 to 5 V/1 to 10 V |
Permissible input range | ±30 V |
Rated accuracy | 1 to 5 V: ±4 mV, 1 to 10 V: ±9 mV |
Data update frequency | 40 ms |
Temperature drift | 1 to 5 V: ±4 mV/10 °C, 1 to 10 V: ±9 mV/10 °C |
Withstand voltage | 1.5 kV AC between input signal and system for 1 minute |
Maximum current consumption | 5 V system: 300 mA, 24 V system: 140 mA |
External connection | Pressure clamp terminal, MIL cable, Dedicated signal cable (KS1) |
3. Model Selection of SAV144 Analog Input Modules
Model | Suffix Codes | Description | |||
SAV144 | Analog input module (1 to 5 V/1 to 10 V, 16 channels, module isolation) | ||||
-S | Standard type | ||||
-H | With HART communication [Release: R1.02.00] | ||||
5 | For pressure clamp terminal block or MIL cable with no explosion protection | ||||
6 | With signal cable interface adapter and no explosion protection | ||||
E | For pressure clamp terminal block or MIL cable with explosion protection | ||||
F | With signal cable interface adapter and explosion protection | ||||
3 | With ISA Standard G3 and temperature (-20 to 70 ºC) | ||||
Option Code | /A4S00 | With pressure clamp terminal block for analog [Model: STA4S-00] | |||
/A4S10 | With pressure clamp terminal block for analog (with surge absorber) [Model: STA4S-10] | ||||
/A4D00 | With dual-redundant pressure clamp terminal block for analog [Model: STA4D-00] | ||||
/A4D10 | With dual-redundant pressure clamp terminal block for analog (with surge absorber) [Part name: STA4D-10] | ||||
/PRP | With prevention pin of false insertion | ||||
/CCC01 | With connector cover for MIL cable (for flat ribbon cable) [Model: SCCC01] |
4.Typical Order Codes
Typical order codes | Remarks |
SAV144-S53 | Standard type |
SAV144-S63 | Standard type with KS interface adaptor |
SAV144-H53 | Hart type |
SAV144-H63 | Hart type with KS interface adaptor |
5. External Dimension
Address: P.O. Box 17033, Jebel Ali Free Zone - South 2 Dubai, United Arab Emirates
Tel: +971558915937
Fax: +971558915956
E-mail:
info@rostockgroup.com
technical@rostockgroup.com
commercial@rostockgroup.com
Get the latest special offers and discount information sent to your email address.
Copyright © Rostock Group Co.,Limited All Rights Reserved. Sitemap